|
Miscellaneous Accessories |
 |
 |
 |
|
 Badge Holder: Part# BH10
This “petite” badge holder is a space saving design that can easily hold up to 10 square or hex shaped film badges.
X-Rite 331 Battery Powered Densitometer
 Though the X-Rite 331 Densitometer is portable and compact, it has the same accuracy and repeatability as larger countertop units, measuring densities up to 4.0 D.
- Battery Powered, Black and White Transmission Densitometer
- Exceptional Reliability: accuracy that’s +or -.02D and a repeatability of +or -.01D
- The unit’s measuring range encompasses 0-3.5D with the 1mm aperture and 0-4D with the 2mm aperture
- Scale factor (slope) stability: ±1% per 6 months
- Self-contained light table gives the densitometer added versatility - there’s no need for an external light source
- Internal light table designed for easy measurement on all areas of film up to 11 inches wide
- Complete with Push button null, an on/off switch to prevent battery drainage, a certified step wedge, a low-battery indicator (typically after 1200 readings), rechargeable Ni-Cad batteries and charger, and an instrument carrying case
- Measuring length: 5.5 inches
 Item Description $35.00
- 20" / 50cm CALIPERS
- 1/4" Aluminum construction
- Measurements are both in centimeters and inches
- The Caliper has a nylon slide so it slides smoothly, yet stays firmly in place when set.
 Item Description $28.00
Lead Vinyl Blocker (Durable, flexible lead vinyl.)
 Demi-Apron
- Attached to soft steel spring for ease of application.
- Aprons may be purchased separately or as a set with or without the rack.
- Available as a set of 4 with a rack and without.
- Standard colors for each size, custom colors available for an additional cost
The EasyGlide Patient Mover SKU: TR-1006
 The EasyGlide™ Patient Mover is an easy to use, easy to store device that allows a single attendant to move most patients gurney to table & back without strain or difficulty. This patient mover simply unfolds from convenient storage and slides under the patient with ease. Side pull straps allow the mover to be easily slid from one surface to another without the attendant bending over or climbing on the table to reach the mover, thus avoiding the chance of back or other injury.
The EasyGlide™ is made of waterproof nylon that can be easily wiped clean. The top surface of the mover has a special urethane coating that resists soiling. The bottom surface is of coated nylon, which slides easily on all surfaces. Hand holds at the head & foot end can be used to guide the mover when necessary
MRI Non-Magnetic Contoured Shifter-Patient Mover SKU: PV-300X
Slides easily on a bed sheet or stretcher pad thanks to the nearly friction-free surface. Special slip coating prevents the patient from sticking to the mover during transfers and results in less static buildup. No more wrenching pulls; no more back strains. Uneven transfers are a breeze, the semi rigid board bridges uneven gaps. Radiolucent and artifact free, the shifter can be left in place during X-ray procedures and minor surgery.
Features
- New contoured shape for easier patient loading and unloading, especially in tight quarters
- Built in ionic silver antimicrobial agents to control levels of bacteria - active for the life of the board
- Antistatic inhibitors
- Anti-pinch hand holds
- Ergonomic design to reduce healthcare workers stress and injuries
- X-Ray translucent
- Artifact free
- 500lb Weight Capacity
- Can use storage brackets (TR-1009) shown below
Specifications: Model # PV-3000
| Width: |
22"
|
|
Length:
|
72"
|
|
Thick:
|
3/16"
|
Specifications: Model # PV-3001
| Width: |
17 3/4"
|
|
Length:
|
72"
|
|
Thick:
|
3/16"
|
 MRI Non-Magnetic PVC Body Transfer Board SKU: PV-1121
 8 carrying handles allow for quick and effect patient transfers. Made of high-density polyethylene, easy to clean.
- 71” Long x 23-1/2”
- Wide x 1/4” Thick
- Made of high-density polyethylene
- Weight Capacity: 400lbs.
MRI Non-Magnetic Shockless Shifter SKU: TR-1000
  Surprise zaps aren’t just painful and dangerous for patients; they can jeopardize expensive electronic medical equipment and cause power outages. Conductive Shifter is made with carbon-filled plastic that actually conducts electricity, not simply treated with an anti-stat product to reduce static. Static charges can’t build up on a conductive surface, so there are no more painful shocks ever, GUARANTEED!
Features:
Won’t build up a static charge
Radiolucent
Can’t damage electronics
100% shock protection
Specifications
- Weight Capacity: 350 lbs
- 22" Wide x 72" Long
Vertical Wall Hanger for Shifter Boards SKU: TR-1004
Horizontal Wall Hanger for Shifter Boards SKU: TR-1005
 Mobile X-ray Cassette Holder
- Holder accommodates x-raycassettes from 8x10" - 14x17" with or without a grid.
- Spring-loaded clamp firmly fixes the cassette in place yet allows easy removal of the cassette/film processing.
- Horizontal & Vertical movement (7-15:" and 29-47" respectively) is fixed via positive acting screw-type locks.
- X-ray Cassette may also be rotated to either side of the vertical axis by 90 degrees to provide additional positioning versatility.
- Weight = 53 lbs
Slapper™ Non-Slip Cassette Holder
Applications: Lightweight device for cross-table laterals. Adapts to all cassette sizes
Slapper™ Non-Slip Cassette Holder $60.51
WEIGHT BEARING CASSETTE HOLDER
Developed to facilitate longitudinal arch and lateral projection studies.
|
Mobile X-ray Cassette Holder
Has open area 12 3/4" x 3 1/2" x 4" and bottle holder section 3 1/2" x 3 1/2" x 4".
The Glove Caddy can hold glove boxes up to 5 1/2" W x 3 1/2" H x 10" L.